Supermicro SAS chassis CSE-836E1-R800V / B - JBOD

1. 800W Redundant Power Supply
2. 16 x 1" Hot-swappable SAS / SATA Drive Bays
3. Hard Drive Backplane with 1x 28-Port
    3Gb/s SAS Expander Chips &
    Enclosure Management
4. 1 x Slim DVD-ROM Drive
    1 x Slim Floppy Drive (Optional)
5. 7x Full-height, Full-length Expansion Slot
6. 3 x 8cm Hot-swappable Fan
7. 2 x 8cm Rear-exhaust Fan
8. Power Switch & 6 LED Indicators

The SC836 storage family supports 16HDD bays.
Both can be configured as standalone storage servers, head-node storage servers, or as
JBOD (Just-a-Bunch-Of-Drive) Server configurations, depending upon the motherboard and
cascading options chosen.
A key element of the Supermicro design is the intelligent backplane. A 28-port intelligent SAS
expander switch, the LSI SASX28 is used to establish the SAS connections between the drives
and the other devices on the backplane. Single-port systems, referred to in this document as “E1”
systems use a single expander switch. Dual-port systems, referred to as “E2” systems employ
two expander switches.

In an E1 system, each drive on the backplane is connected to the expander switch via a direct
SAS link (15 links for the 933 or 16 links for the 836). Twelve additional SAS links to/from the
expander (4+4+4) are routed to three (3) mini SAS 4i connectors on the backplane for access by
the system. This allows easy connection to a SAS controller (either an add-on HBA or built-into
the motherboard) via a four-lane mini-SAS cable and also easy cascading to additional systems
via the other four-lane connector. The SAS expander chip discovers its connectivity at power-on
and by nature of its SAS switch architecture preserves full bandwidth for each drive.

Multiple Host Bus Adapters can be installed in server head-node to increase overall capacity or
for redundancy (or both). Each HBA can support up to 122 drives. The following table shows
storage capacities for 1, 2 and 3 SAS controllers using drive capacity available today. Note that it
is not advisable to mix SAS and SATA drives within the same enclosure, but SAS and SATA
JBODS may be included within the same storage subsystem.

#PCI-E
Controllers DriveType DriveCapacity Max#Drives Storage Capacity
1           SAS       147GB*        122        17.9TB
2           SAS       147GB         244        35.8TB
3           SAS       147GB         366        53.7TB
1           SATA      750GB         122        91.5TB
2           SATA      750GB         244        183.0TB
3           SATA      750GB         366        274.5TB

Mother Board: Kies het gewenste moederbord JBOD Storage Power-up Control Board CSE-PTJBOD-CB1    €454,86  U kunt nog maximaal: 0 items toevoegen!

SATAII Harddisk: Qualified - HDDs 80GB SATA-II 3.5LP 11MS 7200RPM 8MB 3Gb/s + €42,64 160GB SATA-II 3.5LP 12.4MS 7200RPM 8MB 3Gb/s + €51,87 250GB SATA-II 3.5IN 12.6MS 7200RPM 8MB 3Gb/s + €57,80 250GB SATA-II 24x7 3.5IN 12.6MS 7200RPM 16MB 3Gb/s + €75,58 500GB SATA-II 3.5IN 8.5MS 7200RPM 16MB 3Gb/s + €114,85 500GB SATA-II 24x7 3.5LP 8.5MS 7200RPM 16MB 3Gb/s + €127,45 750GB SATA-II 3.5IN 8.5MS 7200RPM 16MB 3Gb/s + €203,95 750GB SATA-II 24x7 3.5IN 8.5MS 7200RPM 32MB 3Gb/s recommended + €210,10 1TB Hitachi E7K1000 HDS721010KLA330 3Gb/s + €220,25 1TB Hitachi 24x7 A7K1000 HUA721010KLA330 3Gb/s + €262,20 1TB Seagate ST31000340AS 8.5MS 7200RPM 32MB 3Gb/s + €209,76 1TB Seagate 24x7 ES.2 ST31000340NS 8.5MS 7200RPM 32MB 3Gb/s + €228,85 1,5TB Seagate ST31500341AS 8.5MS 7200RPM 32MB 3Gb/s + €210,90 1TB Western Digital WD1002FYPS RE3 32MB 3Gb/s + €159,60 2TB Western Digital WD20EADS GP 32MB 3Gb/s + €216,60 2TB Western Digital WD2002FYPS RE4-GP 64MB 3Gb/s + €302,10 2TB Barracuda® XT 64MB ST32000641AS 6Gb/s + €319,20 150GB VelociRaptor 10K 16MB WD1500HLFS 3Gb/s + €168,72 300GB VelociRaptor 10K 16MB WD3000HLFS 3Gb/s + €305,52  U kunt nog maximaal: 0 items toevoegen!

Interconnections: Cable Assembly, External Cascade Cables , JBOD Single Port, Backplane to I/O plate Cable – CBL-0167L recommended + €34,20 Dual Port, Backplane to I/O plate Cable – CBL-0168L + €51,30 HBA to Backplane cable: CBL-0108L-02 Mini SAS 4i to Mini SAS 4i + €28,50 HBA to Backplane cable: CBL-0117 SAS 8484 to Mini SAS 4i + €28,50 External Cascade Cable – P/N CBL-0166L recommended + €25,08 Three pins to three pins 9” Fan Power Extension Cord recommended + €17,10 eSATA bracket voor PC ADP-ESATA-2 + €17,10 Interne SAS x4 naar mini-SAS x4 (MB->BP) + €62,70  U kunt nog maximaal: 7 items toevoegen!

Support: Additionale support overeenkomsten RMA Easy (Opstart / Begeleiding RMA traject)    €0,00 RMA Extra (RMA Easy+ Adv. replacement indien op voorraad)    €85,50 RMA Silver (RMA Extra+ alle transportkosten)    €169,86 RMA Gold (kritische spare parts blijven 3 jaar op voorraad) recommended    €535,80  U kunt nog maximaal: 0 items toevoegen!

Totaal configuratie

Prijs: €1.052,22